Home > Products > Compressed Air Receivers > Compressed Air Receivers

Compressed Air Receivers

Model: WBT0.3

Capacity FAD: 1560 cfm

Working pressure: 8 bar

Description Specifications Applications FAQ Related Products

Get Quote

Description

Pressure vessels built to recognised pressure vessel codes with test certificates. The Compressed Air Receivers is built for continuous industrial duty. It runs on a direct-coupled air end with no belts to re-tension, and it is delivered as a complete package — airend, motor, cooler, separator and controller on one base frame — so on-site work is limited to power, piping and a drain.

Highlights of the Compressed Air Receivers

Pressure vessels built to recognised pressure vessel codes with test certificates
Capacity range from 100 L up to 5000 L
Carbon steel or stainless steel, with painted or galvanised finish
Buffers demand peaks so the compressor is not cycling on every short burst

Specifications

Model	Capacity	Working Pressure	Total Height	Inside diameter	Net Weight
Model	L	bar	mm	mm	kg
WBT0.3	300	8	1560	550	92
10	1562	112
13	1564	156
16	1564	156
25	1568	195
30	1568	195
40	1572	262
WBT0.5	500	8	2063	600	155
10	2063	155
13	2067	157
16	2067	157
WBT0.6	600	8	1844	700	170
10	1846	196
13	1846	220
16	1846	240
25	1850	280
30	1855	372
40	1859	410
WBT1.0	1000	8	2240	800	226
10	2240	262
13	2340	271
16	2343	325
25	2351	490
30	2355	576
40	2355	582
WBT1.5	1500	8	2357	1000	338
10	2357	338
13	2359	388
16	2363	498
25	2368	630
30	2372	735
40	2380	1050
WBT2.0	2000	8	2692	1100	460
10	2692	460
13	2694	505
16	2698	660
25	2702	815
30	2706	998
40	2719	1470
WBT2.5	2500	8	2776	1200	846
10	2778	847
13	2782	850
30	2795	855
WBT3.0	3000	8	2807	1300	521
10	2809	621
13	2813	787
16	2817	1031
35	2834	1755
40	2838	2243

Applications & Service

Compressed Air Storage

Buffering supply and demand.

Demand Fluctuation Buffering

Stopping the compressor cycling on short peaks.

Peak Top-Up

Covering short high-demand periods.

Emergency Air Supply

Holding air for controlled shutdown.

18-Month Warranty
Every unit ships with an 18-month warranty on the air end and 12 months on the rest of the machine, counted from commissioning or 24 months from shipment, whichever comes first.
Factory Test Before Shipment
Each machine is run on the test bench and the delivered flow, working pressure, current draw and noise level are recorded against the datasheet before it is crated.
Engineer Commissioning Support
Installation drawings, piping diagrams and a commissioning checklist are supplied with the machine, with remote engineering support during start-up.
Spare Parts Held in Stock
Airends, motors, controllers, filters, separators and cooler assemblies are held in our own warehouse, so service parts are not tied to a production run.

FAQ

What size receiver do I need?

Roughly, one litre of receiver for every litre per second of free air delivery, and more where the demand is intermittent. The capacity table lists the sizes we build.

What standard are the vessels made to?

The vessels are built to recognised pressure vessel codes with the test certificates supplied. Tell us which code your market requires when you order.

Where does it go in the system?

Between the compressor and the dryer, or after the dryer if you want to buffer dry air. It should be protected by a safety valve and drained.

Does it need inspection?

In most jurisdictions a pressure vessel needs periodic inspection — check the local rule for your installation.