Home > Products > Booster Air Compressors > Booster Air Compressor
Pressure booster taking base-compressor air up to the process pressure. The Booster Air Compressor is built for continuous industrial duty. It runs on a direct-coupled air end with no belts to re-tension, and it is delivered as a complete package — airend, motor, cooler, separator and controller on one base frame — so on-site work is limited to power, piping and a drain.
The machine as shipped: canopy, control panel, service doors and mounting feet.
Close-up of this part of the machine.
Close-up of this part of the machine.
Close-up of this part of the machine.
Close-up of this part of the machine.
| Model | Working pressure | FAD | Power | Voltage | Starter | Pipe Diameter | Water Consumption | Weight | Dimension (mm) | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. | bar | m3/min | kw | V/Hz | Mode | Air outlet | Water inlet/outlet | t/h | Kg | L | W | H |
| WAE-6.0 | 30-40 | 6.0 | 67 | 380/50 or Customized | Star-Delta or Inverter | DN40 | Rc1-1/2" | 20 | 3000 | 2760 | 1500 | 1500 |
| WAE-8.0 | 30-40 | 6.0 | 85 | 380/50 or Customized | Star-Delta or Inverter | DN40 | Rc1-1/2" | 20 | 3500 | 2760 | 1500 | 1500 |
| WAE-11.0 | 30-40 | 11.0 | 120 | 380/50 or Customized | Star-Delta or Inverter | DN40 | Rc1-1/2" | 20 | 4400 | 3620 | 1800 | 2000 |
| WAE-13.0 | 30-40 | 13.0 | 135 | 380/50 or Customized | Star-Delta or Inverter | DN40 | Rc1-1/2" | 30 | 4650 | 3620 | 1800 | 2000 |
| WAE-14.0 | 30-40 | 14.0 | 145 | 380/50 or Customized | Star-Delta or Inverter | DN40 | Rc1-1/2" | 30 | 4850 | 3620 | 2100 | 2000 |
| WAE-16.0 | 30-40 | 16.0 | 185 | 380/50 or Customized | Star-Delta or Inverter | DN50 | Rc2" | 30 | 5000 | 3620 | 2100 | 2000 |
| WAE-20.0 | 30-40 | 20.0 | 222 | 380/50 or Customized | Star-Delta or Inverter | DN50 | Rc2" | 50 | 7000 | 4165 | 2150 | 2100 |
| WAE-25.0 | 30-40 | 25.0 | 250 | 380/50 or Customized | Star-Delta or Inverter | DN65 | Rc2-1/2" | 50 | 8000 | 4590 | 2150 | 2100 |
| WAE-30.0 | 30-40 | 30.0 | 310 | 380/50 or Customized | Star-Delta or Inverter | DN65 | Rc2-1/2" | 60 | 10000 | 4590 | 2150 | 2100 |
| WAE-36.0 | 30-40 | 36.0 | 360 | 380/50 or Customized | Star-Delta or Inverter | DN65 | DN100 | 80 | 12000 | 6000 | 2300 | 2100 |
| WAE-40.0 | 30-40 | 40.0 | 410 | 380/50 or Customized | Star-Delta or Inverter | DN65 | DN100 | 90 | 13000 | 6500 | 2500 | 2300 |
Raising base-compressor air to the blow pressure.
Process air above what a standard compressor delivers.
Consistent assist-gas pressure at the head.
Controlled pressure build-up for testing.
Pressure increase for gas handling systems.
Pipeline and vessel purging duty.
Every unit ships with an 18-month warranty on the air end and 12 months on the rest of the machine, counted from commissioning or 24 months from shipment, whichever comes first.
Each machine is run on the test bench and the delivered flow, working pressure, current draw and noise level are recorded against the datasheet before it is crated.
Installation drawings, piping diagrams and a commissioning checklist are supplied with the machine, with remote engineering support during start-up.
Airends, motors, controllers, filters, separators and cooler assemblies are held in our own warehouse, so service parts are not tied to a production run.
When the process pressure is above what a standard compressor can deliver efficiently — think laser cutting assist gas, PET bottle blowing, or topping up an existing higher-pressure system.
A booster raises the pressure of air it is fed. It is normally installed after a base compressor and takes the air from that pressure up to the process pressure.
The booster is selected against the inlet pressure and the required outlet pressure. Give us both figures and we will size the unit.
The compression heat is removed by the cooler package on the skid; the required cooling medium is stated in the specification table.
Tell us your requirements and our sales team will reply within 24 hours.
