Compressed Air Filters

Description

Multi-stage compressed air filtration: particulate, coalescing and carbon stages. The Compressed Air Filters is built for continuous industrial duty. It runs on a direct-coupled air end with no belts to re-tension, and it is delivered as a complete package — airend, motor, cooler, separator and controller on one base frame — so on-site work is limited to power, piping and a drain.

Highlights of the Compressed Air Filters

Multi-stage compressed air filtration: particulate, coalescing and carbon stages
Removes water aerosol, oil aerosol and particulate from the air line
Filtration grades selectable down to fine aerosol removal
Bank-mounted sets with the drains already piped

Air Intake Filtration

Heavy-duty intake filter with a high dust-holding capacity. Clean intake air is the cheapest way to hold discharge temperature and power draw where the datasheet says they should be.

Air Intake Filtration

Heavy-duty intake filter with a high dust-holding capacity. Clean intake air is the cheapest way to hold discharge temperature and power draw where the datasheet says they should be.

Specifications

Model	Flow Rate	Connection	Dimension (mm)
Model	cfm	m3/min	inch	A	B	C	D
WBF0120	42	1.2	3/4	100	214	181	110
WBF0200	70	2.0	3/4	100	275	242	145
WBF0300	106	3.0	3/4	100	275	242	175
WBF0350	124	3.5	1	130	320	273	185
WBF0500	177	5.0	1.5	130	320	273	185
WBF0750	265	7.5	1.5	130	402	355	230
WBF1050	370	10.5	1.5	130	402	355	270
WBF1450	512	14.50	2	180	527	465	390
WBF2200	777	22.00	2	180	707	645	570
WBF2500	880	25	2.5	225	857	779	570
WBF3000	1059	30	2.5	225	857	779	630
WBF3500	1235	35	3	225	1007	929	700
WBF4500	1589	45	3	225	1007	929	700
WBF4900	1730	49	4	225	1007	929	700
WBFL2200	777	22	DN65	310	707	645	110
WBFL2500	880	25	DN65	360	857	779	570
WBFL3000	1059	30	DN80	360	857	779	630
WBFL3500	1236	35	DN100	360	1007	929	700
WBFL4500	1589	45	DN80	360	1007	929	700
WBFL4900	1730	49	DN100	360	1007	929	700

Applications & Service

Compressed Air Purification

Removing aerosol and particulate before use.

Pneumatic System Protection

Extending valve and cylinder life.

Instrument Air Supply

Protecting sensitive instruments.

Cleanroom Supply

Air quality for controlled environments.

18-Month Warranty
Every unit ships with an 18-month warranty on the air end and 12 months on the rest of the machine, counted from commissioning or 24 months from shipment, whichever comes first.
Factory Test Before Shipment
Each machine is run on the test bench and the delivered flow, working pressure, current draw and noise level are recorded against the datasheet before it is crated.
Engineer Commissioning Support
Installation drawings, piping diagrams and a commissioning checklist are supplied with the machine, with remote engineering support during start-up.
Spare Parts Held in Stock
Airends, motors, controllers, filters, separators and cooler assemblies are held in our own warehouse, so service parts are not tied to a production run.

FAQ

What grade of filter do I need?

It depends on the application. General workshop air usually needs a particulate filter and a coalescing filter; breathing air or instrument air needs additional stages.

How often are the elements changed?

On pressure drop, not on a calendar. Fit a differential pressure gauge and change the element when the drop reaches the figure in the manual.

Where should the filters be fitted?

After the dryer, as close to the point of use as practical. Filtering before the dryer loads the dryer with water it should not have to remove.

Can I combine stages?

Yes. Multi-stage filter sets are supplied as a bank on a common frame with the drains already piped.